[. . . ] [. . . ] Attach the slim SATA to IDE Converter (ADSSSAI) onto a slim SATA optical drive connector. 2. Insert the slim SATA to IDE Converter onto the slim SATA optical drive, aligning the three screw holes from the Converter and the mounting bracket. IDE position jumper settings are configured here Attach 40-pin IDE ribbon cable here Attach 4-pin Molex power source here 3. Secure the Converter onto the mounting bracket using the three larger round head screws. 2. Attach a 40-pin IDE ribbon cable onto the ADSSSAI for data connection, and a 4-pin Molex power cable to power the unit. Configure the IDE position jumper located besides the 4-pin Molex power depending on its position on the IDE ribbon cable. "C" marked on the board stands for "Cable Select" "S" marked on the board stands for "Slave" "M" marked on the board stands for "Master" 3. TECHNICAL SUPPORT Email: Internet: http://www. addonics. com/sales/query/ http://www. addonics. com Technical Support (8:30 am to 6:00 pm PST) Phone: 408 453-6212 Email: http://www. addonics. com/support/query/ [. . . ] [. . . ]